Machine translation from English source
General
The ship's management team is responsible for all surveys and must ensure proper preparation and communication between departments prior to requesting a surveyor.
Every effort should be made to adhere to the examination schedule outlined in the class examination book and verified against the class computer printout.
Machines and tanks must be presented promptly in a clean and well-lit condition.
Procedures for entering closed or confined spaces
Procedures for entering closed or confined spaces must be followed, the space is well
ventilated and breathing apparatus are available at the entrance to the room. entry » is required.
A » permission of
The class survey book must be signed by the surveyor upon satisfactory completion of the survey.
Notes on statutory certificates, survey inspections, etc.
Docking Research (Norwegian companies vacancies for seafarers)
This survey is conducted by the class register.
Continuous shooting and equipment
This survey is carried out by the ‘Register, Machine Surveyor’ class.
The intervals between successive examinations in each subject should not exceed five years.
Approximately 20% of the equipment must be inspected every year and a schedule has been drawn up for this (schedule book with a senior mechanic).
All parts under the machinery are listed on the class master record with the computer code number (copy of the master record on board) with the chief engineer.
The exam date is indicated by the month and year only, see the top right corner of the certificate.
The surveyor should be asked to sign the schedule book.
Where senior mechanics were issued a class A “certificate of qualifications.”
Permission»
providing them with the opportunity to examine certain parts of the machinery, where practicable, at sea and a limited confirmatory survey may be carried out by the class's exclusive surveyor at the next opportunity.
All items under the hull are listed on the class master record with a computer code number (copy of the master record on board with the chief engineer).
The exam date is indicated by the month and year only, see the top right corner of the certificates.
Tailshaft(Norwegian companies vacancies for seafarers)
This survey is carried out by the ‘Register, Machine Surveyor’ class. The survey should be carried out at intervals of no more than five years.
The Service of the party carrying out the detection of cracks in the cone must be involved.
Auxiliary Oil Boiler Inspection
This examination must be carried out by the class registrar, a machine inspector.
The boiler must be inspected at intervals of no more than two and a half years.
Auxiliary Exhaust Gas Boiler
This survey must be carried out by the class registrar, machine inspector.
The boiler must be inspected at intervals of no more than two and a half years.
The adjustment of the safety valves must be carried out by a senior mechanic at the earliest opportunity and confirmation of this must be sent to the company office.
